ARB 4x4 Accessories 813402 Awning Bracket

Out of stock

ARB

Awning Bracket Kit

Awning Bracket

Awning Bracket; 50mm Wide; 8mm Pre-Drilled Holes; Gusseted;


SPECIFICATIONS:
  • WARNING CA Proposition 65: No

FEATURES:
  • Awning Bracket

The OS850 awning bracket is designed with welded gussets to provide additional strength when awnings are mounted to roof bars on vehicles used off road or under extreme conditions. Zinc plated and powder coated for corrosion resistance and designed to mount either upright or inverted, the OS850 awning bracket is 50 mm wide allowing it to fit over both Thule SquareBar & Rhino Heavy Duty in the inverted position, or upright using T-bolts or channel nuts on Thule ProfessionalBar, WingBar & AeroBar or Rhino Heavy Duty. Pre-drilled to accept 8mm bolts, at least 2, but preferably 3 bolts should be used to mount to the roof bar for maximum strength. The outer bolt hole between the gussets must always be used for the gusset to be effective. Three slotted 6mm holes are provided to mount the awning. The 813402 awning bracket is not supplied with hardware. Due to different bar designs, it is recommended to use T-bolts and channel nuts supplied by the roof bar manufacturer. Units are now in stock with additional shipments due mid June. The current awning bracket P/No OS3071 has recently been upgraded from 3mm to 4mm construction however it is considered lighter duty and designated for highway use.

Today, we supply and manufacture a complete selection of the most highly regarded 4WD accessories in the world. Unlike many 4x4 equipment suppliers that simply stock a collection of parts with a low cost, `one size fits all' mentality, ARB thoroughly researches and tests each product before releasing it to the 4x4 public. We consider many factors during this analysis, including specific vehicle characteristics, the conditions the product will work in, and the overall quality of the product itself. Take suspension systems for example. Many aftermarket 4x4 suspension kits ignore the obvious differences between varying vehicle suspension set-ups and driver requirements, offering instead an increased ride height and little else. ARB's Old Man Emu suspension division employs a very different approach. Typically our OME engineers will purchase the vehicle in question, test it in a variety of conditions to determine if and where improvements can be made, then develop a line of finely tuned, totally integrated suspension systems, each offering varying degrees of comfort, load carrying capability and control characteristics. When combined with our state-of-the-art manufacturing plants and a highly skilled workforce, this attention to detail is what sets ARB 4x4 equipment apart. So whether you're new to 4WDing and putting your first truck to the test, or a 4x4 veteran getting set for your next off road adventure, you can rely on ARB 4x4 Accessories. we won't let you down.

$25.13
Wishlist

To add this product to your wish list you must Sign In or Create an account

Awning Bracket Kit

Awning Bracket

Awning Bracket; 50mm Wide; 8mm Pre-Drilled Holes; Gusseted;


SPECIFICATIONS:
  • WARNING CA Proposition 65: No

FEATURES:
  • Awning Bracket

The OS850 awning bracket is designed with welded gussets to provide additional strength when awnings are mounted to roof bars on vehicles used off road or under extreme conditions. Zinc plated and powder coated for corrosion resistance and designed to mount either upright or inverted, the OS850 awning bracket is 50 mm wide allowing it to fit over both Thule SquareBar & Rhino Heavy Duty in the inverted position, or upright using T-bolts or channel nuts on Thule ProfessionalBar, WingBar & AeroBar or Rhino Heavy Duty. Pre-drilled to accept 8mm bolts, at least 2, but preferably 3 bolts should be used to mount to the roof bar for maximum strength. The outer bolt hole between the gussets must always be used for the gusset to be effective. Three slotted 6mm holes are provided to mount the awning. The 813402 awning bracket is not supplied with hardware. Due to different bar designs, it is recommended to use T-bolts and channel nuts supplied by the roof bar manufacturer. Units are now in stock with additional shipments due mid June. The current awning bracket P/No OS3071 has recently been upgraded from 3mm to 4mm construction however it is considered lighter duty and designated for highway use.

Today, we supply and manufacture a complete selection of the most highly regarded 4WD accessories in the world. Unlike many 4x4 equipment suppliers that simply stock a collection of parts with a low cost, `one size fits all' mentality, ARB thoroughly researches and tests each product before releasing it to the 4x4 public. We consider many factors during this analysis, including specific vehicle characteristics, the conditions the product will work in, and the overall quality of the product itself. Take suspension systems for example. Many aftermarket 4x4 suspension kits ignore the obvious differences between varying vehicle suspension set-ups and driver requirements, offering instead an increased ride height and little else. ARB's Old Man Emu suspension division employs a very different approach. Typically our OME engineers will purchase the vehicle in question, test it in a variety of conditions to determine if and where improvements can be made, then develop a line of finely tuned, totally integrated suspension systems, each offering varying degrees of comfort, load carrying capability and control characteristics. When combined with our state-of-the-art manufacturing plants and a highly skilled workforce, this attention to detail is what sets ARB 4x4 equipment apart. So whether you're new to 4WDing and putting your first truck to the test, or a 4x4 veteran getting set for your next off road adventure, you can rely on ARB 4x4 Accessories. we won't let you down.

All Products that requires LTL Freight will be shipped for free. Be aware The Buyer is Responsible for all Return LTL Freight cost.

Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.

To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.

To complete your return, we require a receipt or proof of purchase.

Please do not send your purchase back to the manufacturer.

There are certain situations where only partial refunds are granted (if applicable) Any item not in its original condition, is damaged or missing parts for reasons not due to our error.

Any item that is returned more than 30 days after delivery.

Refunds (if applicable) Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.

Late or missing refunds (if applicable) If you haven’t received a refund yet, first check your bank account again. Then contact your credit card company, it may take some time before your refund is officially posted. Next contact your bank. There is often some processing time before a refund is posted.

If you’ve done all of this and you still have not received your refund yet, please contact us at admin@fenzausa.com.

Sale items (if applicable) Only regular priced items may be refunded, unfortunately sale items cannot be refunded.

Exchanges (if applicable) We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at admin@fenzausa.com and send your item to: 8367 NW 74th Street Miami Florida US 33166.

Gifts If the item was marked as a gift when purchased and shipped directly to you, you’ll receive a gift credit for the value of your return. Once the returned item is received, a gift certificate will be mailed to you.

If the item wasn’t marked as a gift when purchased, or the gift giver had the order shipped to themselves to give to you later, we will send a refund to the gift giver and he will find out about your return.

Shipping To return your product, you should mail your product to: 8367 NW 74th Street Miami Florida US 33166

You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.

Depending on where you live, the time it may take for your exchanged product to reach you, may vary.

If you are shipping an item over $75, you should consider using a trackable shipping service or purchasing shipping insurance.

We don’t guarantee that we will receive your returned item.